References

Get up to date in no time!
Our Mentors have selected some basic articles that will get you on track with the SimPlant technology. In these articles you will find the necessary scientific validation.

SimPlant

Kraut RA., Implant Dent I992;1:134-139.

"Utilization of 3D/dental software for precise implant site selection: clinical reports".

Mole C , Gerard H , Mallet JL , Chassagne JF , Miller N, Journal of Oral Maxillofacial Surgery, vol 53, N� 2, February 1995, pp.158-62

A new three-dimensional treatment algorithm for complex surfaces: applications in surgery.

SurgiGuide

Ganz, Scott D., Practical Procedures & Aesthetic Dentistry, n� 10, Vol. 15, pp. 763-772

"Use of stereolithographic models as diagnostic and restorative aids for predictable immediate loading of implants".

SAFE System

Tardieu P, Vrielinck L, Escolano E, Computer-assisted Implant Placement, Int J Oral Maxillofac Implants 2003;18:599-604

"A Case Report:Treatment of the Mandible".

Accuracy studies

Sarment D, Sukovic P, Clinthorne N, Int J Oral Maxillofac Impl 2003;18:571-577

"Accuracy of implant placement with a stereolithographic surgical guides".

Vrielinck L, Politis C, Schepers S, Pauwels M, Naert I, Preliminary results from a prospective follow-up study. Int J Oral Maxillofac Surg 2003;32:7-14.

"Image based planning and clinical validation of zygoma and pterygoid implant placement in patients with severe bone atrophy using customized drill guides".

SimPlant

2008, Van de Velde Tommie, Glor Fadi, De Bruyn Hugo, "A model study on flapless implant placement by clinicians with a different experience level in implant surgery", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 19, 1, pp. 66-72

2008, Azari Abbas, Nikzad Sakineh, "Flapless implant surgery: Review of the literature and report of 2 cases with computer-guided surgical approach", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 66, 5, pp. 1015-1021

2008, Mandelaris G.A., Rosenfeld A.L., "The expanding influence of computed tomography and the application of computer-guided implantology", Practical Procedures & Aesthetic Dentistry (Pract Proced Aesthet Dent, PPAD), Volume 20, 5, pp. 297-305

2008, Nikzad S., Azari A., "A novel stereolithographic surgical template for planning treatment involving a mandibular dental implant", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 66, 7, pp. 1446-1454

2008, Frank E., "Weiterverarbeitung von CT - bzw. DVT-Bilddaten, Schablonentechniken", Zeitschrift f�r Zahn�rztliche Implantologie (ZZI), Volume Juli

2008, Ganz Scott D., "Computer-aided design/computer-aided manufacturing applications using CT and Cone Beam CT scanning technology", Dental Clinics of North America (Dent Clin N Am), Volume 52, 4, pp. 777-808

2008, Tardieu Philippe, "Computer-guided implantology in aesthetic cases", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 19, 9, pp. 839

2008, Wang Y.X., Tang Y.S., Shi J., Xu B., "Experimental study of orbital volume using computer assisted technology", Shanghai Kou Qiang Yi Xue (Shanghai Journal of Stomatology), Volume 17, 3, pp. 297-299

2008, Hohl Steffen, Hermanns Pia, "Implantate f�r die Ewigkeit?" Was macht den langzeitigen Erfolg von Implantaten aus?", Implantologie Journal, 3, pp. 8-12

2007, Chau Anson C.M., Li Thomas K.L., Mok W.H., "3D models showing relationship between horizontally impacted mandibular third molars and inferior dental canals using computed tomographic images", Journal of Maxillofacial & Oral Surgery (INDIA), Volume 6, 4, pp. 17-21

2007, Yasui M., Okumura Y., Shimada J., "Radiological and sequential analysis on transplanted beta-tricalcium phosphate in beagle mandible", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 65, 9, Supplement 1, pp. 43e68

2007, Orentlicher G., Goldsmith D., "Computer-guided implantology - A New Era", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 65, 9, Supplement 1, pp. 71

2007, Chang Paul P., Henegbarth Ernst A., Lang Lisa A., "Maxillary zirconia implant fixed partial dentures opposing an acrylic resin implant fixed complete denture: a two-year clinical report", The Journal of Prosthetic Dentistry (J Prosthet Dent), Volume 97, 6, pp. 321-330

2007, Valente F., Schiroli G., Sbrenna A, "Accuracy and clinical outcomes of Computer Aided Oral Implant Surgery: a preliminary study on 25 patients", International Journal of Computer Assisted Radiology and Surgery (Int J Comput Assist Radiol Surg), Volume 2 , Supplement 1 (Proceedings of 21the International Congress and Exhibition, Berlin Germany, June 27-30, 2007)

2007, Valente F., Schiroli G., Sbrenna A, "Computer aided oral implant surgery (CAOIS): a clinical and radiographic multicenter study on 25 patients", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 18, 5, pp. lxxiv

2007, Tardieu P., Vrielinck L., Escolano E., Henne M., Tardieu A.-L., "Computer-assisted implant placement: scan template, SimPlant, SurgiGuide, and SAFE system", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 27, 2, pp. 141-149

2007, Philippe Beno�t, "Chirurgie reconstructrice pr�-implantaire. Le site donneur mandibulaire ant�rieur", Information Dentaire (Inf Dent, id), Volume 89, 8, pp. 351-358

2007, Lee Woo-Sik, "Three-dimensional CT based planning and implant surgery with SimPlant program: A case report", Clinical Implant Magazine, Volume 1-2, pp. 74-95

2007, Lee Woo-Sik, "Three-dimensional CT based plannning and implant surgery with SimPlant program: a case report", Clinical Implant Magazine, pp. 78-101

2007, Van de Velde T., De Bruyn H., "Flapless surgery and immediate loading versus the classical surgical protocol", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 18, 5, pp. xxxvii

2007, Ganz Scott D., "CT-derived model-based surgery for immediate loading of maxillary anterior implants", Practical Procedures & Aesthetic Dentistry (Pract Proced Aesthet Dent, PPAD), Volume 19, 5, pp. 311-318

2007, Navarrete Alfonso, "Review of Book "Dental Applications of Computerized Tomography: Surgical Planning for Implant Placement", Journal of Prosthodontics (J Prosthodont), Volume 16, 3, pp. 226-227

2007, Caillon P., Buthiau D., Defrennes D., "Le Various Implant Platform Lateral (VIP-L). Application clinique d'un nouveau guide chirurgical", Implant, Volume 13, 3, pp. 167-183

2007, Ganz Scott D., "3-D Imaging and Cone Beam CT is "Where the Action is!", Inside dentistry, Volume February, pp. 102-103

2007, Depprich Rita A., Ommerborn Michell A., Handschel J�rg G.K., Naujoks Christian D., Meyer Ulrich, K�bler Norbert R., "Dentin dysplasia type I: a challenge for treatment with dental implants", Head & Face Medicine, Volume 3, pp. 31-35

2007, Rinaldi M., "Cyst enucleation and immediate placement of oral implants with custom-made bone graft", Computer Aided Implantology Academy Newsletter, Volume 11, November

2007, Groselj D., Groselj H., "Correlation between CT values of the bone and density types", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 18, 5, pp. lxxviii-lxxix

2007, Bellaiche Norbert, "Scanner et tomographie � faisceau conique. Quelle m�thode d'imagerie choisir en odontostomatologie?", Le Fil Dentaire, Volume 27, pp. 16-22

2007, Frank E., "Augen auf beim DVT-Kauf", Zeitschrift f�r Zahn�rztliche Implantologie (ZZI), Volume 23, 4, pp. 2-11

2007, Halbach-Spielau M., Spielau T., "Computergest�tzte minimalinvasive Implantation. Sofortversorgung durch pr�fabrizierte, definitive Zirkonaufbauten und Kronen mittels Safe-Bohrschablonen", Implantologie Journal, 8, pp. 32-35

2007, Palumbo Alessandro, "L�implantologia moderna guidata dal computer", Odontolatria, pp. 3-5

2006, Pretorius Nicolette, "For predictable results: Radio-opaque scanning stents", Dental Technologies (Dent Tech), Volume 64, pp. 5-11

2006, Shapurian T., Damoulis P.D., Reiser G.M., Griffing T.J., Rand W.M., "Quantitative evaluation of bone density using the Hounsfield index", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 21, 2, pp. 290-297

2006, Feuerstein Paul, "Cone beam tomography and the future of implant planning", Inside dentistry, Volume March, pp. 2-3

2006, Valente F., Buoni C., Scarf� B., Mascolo A., Parducci F., "Precision of CAD-CAM stereolithographic mucosa-supported drilling guides in flapless implant placement", European Journal of Implant Prosthodontics (Europ J Impl Prosth), Volume 1, 2, pp. 15-25

2006, Valente F., Buoni C., Scarf� B., Mascolo A., Parducci F., "Precisione delle guide stereolitografiche CAD-CAM ad appoggio mucoso nel posizionamento degli impianti senza sollevamento del lembo", European Journal of Implant Prosthodontics (Europ J Impl Prosth), Volume 1, 2, pp. 15-25

2006, Chow J., Hui E., Lee P.K.M., Li W., "Zygomatic implants-Protocol for immediate occlusal loading: a preliminary report", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 64, 5, pp. 804-811

2006, Ganz Scott D., "Techniques for the use of CT imaging for the fabrication of surgical guides", Atlas of the Oral and Maxillofacial Surgery Clinics of North America (Atlas Oral Maxillofac Surg Clin N Am), Volume 14, 1, pp. 75-97

2006, Ganz Scott D., "The reality of anatomy and the triangle of bone", Inside dentistry, Volume June, pp. 72-77

2006, Rosenfeld Alan L., Mandelaris George A., Tardieu Philippe B., "Prosthetically directed implant placement using computer software to ensure precise placement and predictable prosthetic outcomes. Part 1: Diagnostics, imaging, and collaborative accountability", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 26, 3, pp. 215-221

2006, Trikeriotis D., Paravalou I., Zotalis N., Diamantopoulos P., "Applications of virtual and physical modelling in oral and maxillofacial surgery", Proceedings of CARS, Volume CARS 2006 - Computer Assisted Radiology and Surgery, 20th International Congress and Exhibition, Osaka, Japan, June 28 - July 1, 2006

2006, Dakhno L.A., "Ways fo protection of the patient and the clinician from an injury of the inferior alveolar nerve during the implant installation", News of stomatology (Russian journal) (HC), Volume 2, 47, pp. 81-84

2006, Br�ggen F., "Implantatplanung mit CT-Daten", Implantologie Journal, Volume 5, pp. 32-38

2006, Rosenfeld Alan L., Mandelaris George A., Tardieu Philippe B., "Prosthetically directed implant placement using computer software to ensure precise placement and predictable prosthetic outcomes. Part 2: Rapid-prototype medical modelling and stereolithographic drilling guides requiring bone exposure", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 26, 4, pp. 347-353

2006, Lal K., White G.S., Morea D.N., Wright R.F., "Use of stereolithographic templates for surgical and prosthodontic implant planning and placement. Part II. A clinical report", Journal of Prosthodontics (J Prosthodont), Volume 15, 2, pp. 117-122

2006, Orentlicher G., Goldsmith D., "Computer-Guided Implantology - A New Era", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 64, 9, Supplement 1, pp. 123

2006, Valente F., Schiroli G., Sbrenna A., Buoni C., Gazzerro C., "Computer-aided flapless implantology: combining clinical experience and scientific evidence", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 17, 4, pp. xlv

2006, Rosenfeld Alan L., Mandelaris George A., Tardieu Philippe B., "Prosthetically Directed Implant Placement Using Computer Software to Ensure Precise Placement and Predictable Prosthetic Outcomes. Part 3: Stereolithographic Drilling Guides That Do Not Require Bone Exposure and the Immediate Delivery of Teeth", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 26, 5, pp. 493-499

2006, Grybauskas Simonas, Puisys Algirdas, Linkevicius Tomas, "Ortognatine chirurgija: kaip padaryti veida patrauklu?", Gydymo menas, Volume 9, pp. 63-68

2006, Holmes Simon, Goldner Sean, Bridle Chris, Chin-Shong David, Visram Karima, "Evaluation of complex craniomaxillofacial fractures by a new three-dimensional planning system", British Journal of Oral and Maxillofacial Surgery (Br J Oral Maxillofacial Surg, bjoms), Volume 44, 5, pp. 416-417

2006, Verardi Simone, "CT scans may not be indicated to analyze the distribution of the arteries in the lateral wall of the maxillary sinus", Journal of Evidence-Based Dental Practice, Volume 6, 4, pp. 276-277

2006, Tardieu P., "Computer guided implantology: How far can we go today?", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 17, 4, pp. xxx

2006, Jabero M., Sarment D.P., "Advanced Surgical Guidance Technology: A Review", Implant Dentistry (Implant Dent), Volume 15, 2, pp. 135-142

2006, Van de Velde T.L.A., Glor F.P., De Bruyn H., "A model study on flapless implant positioning and complications", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 17, 4, pp. li

2006, Philippe Beno�t, "Chirurgie reconstructrice pr�-implantaire. Le site donneur mandibulaire post�rieur", Information Dentaire (Inf Dent, id), Volume 88, 10, pp. 491-496

2006, Handelsman M., "Surgical guidelines for dental implant placement", British Dental Journal, Volume 201, 3, pp. 139-152

2006, Giuseppe Luongo, "Chirugia implantare assistita dal computer", Implantologia, Volume Implantologia Orale 2006, 1, pp. 7-31

2006, Mischkowski R.A., Zinser M.J., Neugebauer J., Kubler A.C., Zoller J.E., "Comparison of static and dynamic computer-assisted guidance methods in implantology", International Journal of Computerized Dentistry (Int J Comput Dent), Volume 9, 1, pp. 23-35

2006, Scarfe W.C., Farman A.G., Sukovic P., "Clinical applications of cone-beam computed tomography in dental practice", Journal of the Canadian Dental Association (J Can Dent Assoc, JCDA), Volume 72, 1, pp. 75-80

2006, Lal K., White G.S., Morea D.N., Wright R.F., "Use of stereolithographic templates for surgical and prosthodontic implant planning and placement. Part I. The concept", Journal of Prosthodontics (J Prosthodont), Volume 15, 1, pp. 51-58

2006, Stoppie N., Pattijn V., Van Cleynenbreugel T., Wevers M., Vander Sloten J., Naert I., "Structural and radiological parameters for the characterization of jawbone", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 17, 2, pp. 124-133

2006, Valente F., Sbrenna A., Buoni C., "CAD CAM drilling guides for transferring CT-based digital planning to flapless placement of oral implants in complex cases", International Journal of Computer Assisted Radiology and Surgery (Int J Comput Assist Radiol Surg), Volume 1, Supplement 1, June, pp. 413-415

2006, Tardieu P., Pattijn V., Glor F., "Computer guided implantology: 2006 developments. Dr. James and Virtual teeth.", Dental Horizons, Volume 4, 1, pp. 283-289

2005, Dakhno L.A., "Maxillofacial surgery planning for the insertion of dental implants obtained from CT data using the SimPlant interactive software", Implantology & Paradontology & Osteology (Ukraine, Lviv), Volume 2, 2, pp. 23-27

2005, Nijmeh A.D., Goodger N.M., Hawkes D., Edwards P.J., McGurk M., "Image-guided navigation in oral and maxillofacial surgery", British Journal of Oral and Maxillofacial Surgery (Br J Oral Maxillofacial Surg, bjoms), Volume 43, 4, pp. 294-302

2005, Mengel R., Candir M., Shiratori K., Flores-de-Jacoby L., "Digital volume tomography in the diagnosis of periodontal defects: an in vitro study on native pig and human mandibles", Journal of Periodontology (J Periodontol), Volume 76, 5, pp. 665-673

2005, Todisco Marzio, Trisi Paolo, "Bone mineral density and bone histomorphometry are statistically related", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 20, 6, pp. 898-904

2005, Di Giacomo G.A., Cury P.R., de Araujo N.S., Sendyk W.R., Sendyk C.L., "Clinical application of stereolithographic surgical guides for implant placement: Preliminary results", Journal of Periodontology (J Periodontol), Volume 76, 4, pp. 503-507

2005, Ganz Scott D., "Presurgical planning with CT-derived fabrication of surgical guides", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 63, 9, pp. 59-71 (Suppl 2)

2005, Lemmerman K.J., Lemmerman N.E., "Osseointegrated dental implants in private practice: a long-term case series study", Journal of Periodontology (J Periodontol), Volume 76, 2, pp. 310-319

2005, Al-Harbi S.A., Verrett R.G., "Fabrication of a stable surgical template using staged tooth extraction for immediate implant placement", The Journal of Prosthetic Dentistry (J Prosthet Dent), Volume 94, 4, pp. 394-397

2005, Ganz Scott D., "Use of conventional CT and cone beam (CBCT) for improved dental diagnostics and implant planning", American Association of Dental Radiographic Technicians Newsletter (AADMRT Newsletter), Volume Spring, pp. 7 pages

2005, Ikumi Noriharu, Tsutsumi Sadami, "Assessment of correlation between computerized tomography values of the bone and cutting torque values at implant placement: a clinical study", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 20, 2, pp. 253-260

2005, "The SimPlant Platform", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 20, 3, pp. 342

2005, Tischler M., "Dental implant Placement in the Maxillary Anterior Region: Guidelines for Esthetic Success", Dentistry Today (Dent Today), Volume 24, 3, pp. 72,74,76

2005, Valente Francesco, "L'utilizzo di SimPlant e SurgiGuides per una corretta osteotomia implantare in chirurgia flapless", Il Dentista Moderno (DM), Volume 4 (aprile), pp. 101-109

2005, Caldwell C. Stephen, "Practical incorporation of computed tomography into daily implant treatment", Texas Dental Journal (Tex Dent J), Volume April, pp. 343-354

2005, Moore William S., "Cone Beam CT: a new tool for Esthetic Implant Planning", Texas Dental Journal (Tex Dent J), Volume April, pp. 334-340

2005, Mrazek Bill, "LAB dialogue: 'X' marks the spot", Compendium, Volume 26, 4, pp. 278-279

2005, Yolanda Lopez Martinez, "utilidad de la cefalometria tridimensional en el diagnostico y plan de tratamiento ortodoncico-quiru", Masters Thesis, pp. 43

2005, Sudbrink Steven D., "Computer-Guided Implant Placement with Immediate Provisionalization: A Case Report", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 63, 6, pp. 771-774

2004, Materialise , "Virtuele planning van implantaten in drie dimensies", Dentist News (Dent News), Volume 3, April, pp. 31-33

2004, Sammartino G., Della Valle A., Marenzi G., Gerbino S., Martorelli M., Espedito di Lauro A., di Lauro F., "Stereolithography in Oral Implantology: A Comparison of Surgical Guides", Implant Dentistry (Implant Dent), Volume 13, 2, pp. 133-136

2004, Mupparapu Muralidhar, Singer Steven R., "Implant Imaging for the Dentist", Journal of the Canadian Dental Association (J Can Dent Assoc, JCDA), Volume 70, 1, pp. 32,32a-32g

2004, Schuller-G�tzburg P., Sattlegger P., Grossschmidt K., Schachner P. , "3D-Implantatplanung und Stereolithographie-Implantatbohrschablonen", Stomatologie, Volume 101, 3

2004, Schuller-G�tzburg P., Sattlegger P., Grossschmidt K., Schachner P., "3D-Implant planning and stereolithography implant drill guide", Stomatologie, Volume 101, 3

2004, Tischler M., "Dental implants in the esthetic zone: Considerations for form and function", The New York State Dental Journal (NYSDJ), Volume 70, 3, pp. 22-26

2004, Bianchi J., Fiorellini J.P., Howell T.H., Sekler J., Curtin H., Nevins M.L., Friedland B., "Measuring the efficacy of rhBMP-2 to regenerate bone: a radiographic study using a commercially available software program", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 24, 6, pp. 579-587

2004, Tischler Michael, "Interactive computerized tomography for dental implants: treatment planning from the prosthetic end result", Dentistry Today (Dent Today), Volume 23, 3, pp. 90,92-93

2004, Tischler Michael, "Full arch fixed prosthetics supported by dental implants and natural teeth: planning, provisionalization, treatment sequences: two case examples", Dentistry Today (Dent Today), Volume 23, 9, pp. 86,88,90-91

2004, Abeloos Johan, Barbier Lieven, "Tandimplantaten met vaste brug in ��n dag incisieloze plaatsing van tandimplantaten in de bovenkaak m.b.v. een computergemaakte boormal en plaatsen van de tijdelijke vaste brug op dezelfde dag, casus", AZ Nieuws, Volume 11, april, pp. 8

2003, Rodriguez A., Anastassov G.E., Lee H., Buchbinder D., Wettan H., "Maxillary sinus augmentation with deproteinated bovine bone and platelet rich plasma with simultaneous insertion of endosseous implants", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 61, 2, pp. 157-163

2003, Levine M.H., Goddard A.L., Dodson T.B., "Inferior Alveolar Nerve Canal Position: A Clinical and Radiographic Study", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 61, 8, Supplement 1, pp. 72

2003, Pietz W.M., Burton R.G., Fridrich K.L., Stanford C.M., Schneider R., "Bone Quality and Surgeon's Assessment During Maxillary Implant Placement: Outcomes 2 Years Following Prosthesis Insertion", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 61, 8, Supplement 1, pp. 72a-73

2003, Ganz Scott D., Kraut Richard A., "Are Implant prosthetic procedures like everyday crown and bridge dentistry?", Implant Dentistry (Implant Dent), Volume 12, 3, pp. 193-197

2003, Tischler M., "Simplified Fixed Implant Prosthetics", Dentistry Today (Dent Today), Volume 22, 9, pp. 84-86

2003, Scortecci G., Misch C., Odin G., "Implantologie basale: une approche th�rapeutique fond�e sur la preuve", Implantodontie, Volume 12, pp. 35-47

2003, Misch Craig M. , "Evaluating bone defects and simulating corrections using SimPlant planning software and stereolithographic models", Headlines, 2, pp. p4-8

2003, Vrielinck L., Politis C., Schepers S., Pauwels M., Naert I. , "Image-based planning and clinical validation of zygoma and pterygoid implant placement in patients with severe bone atrophy using customized drill guides. Preliminary results from a prospective clinical follow-up study", International Journal of Oral and Maxillofacial Surgery (Int J Oral Maxillofac Surg), Volume 32, 1, pp. 7-14

2003, Sarment David P., Al-Shammari K., Kazor Christopher E. , "Stereolythographic surgical templates for placement of dental implants in complex cases", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 23, 3, pp. 287-295

2003, Sarment David P., Sukovic P., Clinthorne N. , "Accuracy of implant placement with a stereolithographic surgical guide", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 18, 4, pp. 571-577

2003, Tardieu P.B., Vrielinck L., "Computer-assisted implantology: the SimPlant program and the SAFE System. Immediate loading of a mandibular bridge on transmucosal implants", Implant, Volume 9, 1, pp. 15-28

2003, Firdaus H., "Implant placement on the narrow maxillary ridge: Use of a stereolithography drill guide", Headlines, 4, pp. p 7

2003, Tardieu P., Vrielinck L., Escolano E. , "Computer-assisted Implant Placement. A Case Report: Treatment of the Mandible", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 18, 4, pp. 599-604

2003, Tardieu Philippe B., Vrielinck L. , "Implantologie assist�e par ordinateur: le programme SimPlant/SurgiCase et le SAFE System. Mise en charge imm�diate d'un bridge mandibulaire avec des implants transmuqueux.", Implant, Volume 9, 1, pp. 15-28

2003, Stroumza J.H., "The role of diagnosis and contemporary technology on endodontic success", Endodontic Therapy: Enhancing Communication Between General Practitioners, Endodontists, and Manufacturers, Volume 3, 1, pp. 0-1

2003, Ganz Scott D. , "Use of stereolithographic models as diagnostic and restorative aids for predictable immediate loading of implants", Practical Procedures & Aesthetic Dentistry (Pract Proced Aesthet Dent, PPAD), Volume 15, 10, pp. 763-772

2002, Frank E., Frank S., Nell S., "CT-optimierte implantologische Planung mit dem pst-Schablonensystem und dem 3D-Finder", Teamwork Interdisziplin�res Journal f�r prothetische Zahnheilkunde (Interdiszipl J Proth Zahnheilkd), Volume 1, pp. 64-70

2002, Claeys Th., Kint J. , "Nut van implantaatsimulatie bij de prothetische rehabilitatie van een klasse 2-maxilla", Dentist News (Dent News), Volume 9, september, pp. 45-49

2002, Gandhi Nailesh , "Treatment considerations for implants in single tooth cases", Dental Asia, May, pp. 21-24

2002, Benjamin Lewis, "Using a customized surgical template for computer-guided implant surgery", Dental Implantology Update (Dent Implantol Update), Volume 13, 7, pp. 49-53

2002, Benjamin Lewis S. , "The evolution of multiplanar diagnostic imaging: predictable transer of preoperative analysis to the surgical site", Journal of Oral Implantology (J Oral Implantol), Volume 28, 3, pp. 135-144

2002, Tardieu Philippe B., Vrielinck Luc , "Implantologie assist�e par ordinateur. Cas clinique: Mise en charge imm�diate d'un bridge maxillaire avec des implants � appuis zygomatiques et pt�rygo�diens", Implantodontie, Volume 46, pp. 41-48

2002, Mills E., "SurgiGuide assures accuracy", Headlines, 1, pp. p 3

2002, Gamboa R., "Dr. Gamboa and the Hidden Tooth", Headlines, 1, pp. p2

2002, Claeys Th., Kint J. , "The Use of Implant Simulation in Prosthetic Rehabilitation of a Class II Maxilla", Headlines, 2, pp. p2-3

2002, Scher E. , "Risk management when operating in the posterior mandible", Implant Dentistry (Implant Dent), Volume 11, 1, pp. 67-72

2002, Magee Graham , <